How to Repair SONY WF-1000XM3 TWS Earbuds Battery in 3 Steps?

True wireless Bluetooth headphones will have insufficient battery life after a long time of use, but generally speaking, it is very complicated to replace the battery of TWS Earbuds headphones, or some headset batteries do not support replacement, but recently we have found that it is very easy to replace the battery of SONY WF-1000XM3 earphones. In this post, let’s tell you how to replace the SONY WF-1000XM3 battery.

TWS Earbuds headphones

SONY TWS Earbuds WF-1000XM3 Battery Replacement Guide

You can perform the steps below to change your SONY WF-1000XM3earphones battery:

Step 1: Open the SONY TWS Earbuds WF-1000XM3 headset cover.

The SONY WF-1000XM3 is divided into left and right ears, and each headset has the same battery built into it. And the left and right ears use a snap-type design, as long as a little effort can open the upper cover of the headphone.

TWS Earbuds
TWS Earbuds

The inner side of the upper cover of the SONY WF-1000XM3 headset, the large circle on the top is the touch control position, and the black foam in the middle is the noise reduction microphone pick-up hole. There is a dustproof patch in the middle of the headset, corresponding to the noise reduction microphone.


Step 2:Remove the two screws from the headset to separate the motherboard from the bottom shell.


Step 3:After removing the screw, you can see the battery on the back of the motherboard.


Installed inside the SONY WF-1000XM3 earbuds is a button battery, made by VARTA, with prices ranging from 40 to 60RMB on the market. However, there are alternative batteries of the same specification on the market.


The above is the battery replacement method for SONY WF-1000XM3 headphones, which is very easy to operate. But before you do it, make sure you’ve bought a button battery for SONY WF-1000XM3.

Leave a Reply

nineteen + ten =